Interlock Driveway Richmond Hill | Paver Driveways & Widening
A-Z Landscaping logoA-Z LandscapingDesign · Luxury Build · Ontario

Richmond Hill · York Region

Interlock Driveways in Richmond Hill

An interlock driveway in Richmond Hill has to carry cars through every freeze and thaw, shrug off plow blades and road salt, and still make the house look its best from the street. A-Z Landscaping is a driveway contractor based on Brodie Drive in Richmond Hill, building paver driveways, widenings and asphalt replacements from Bayview Hill and South Richvale to Mill Pond, Jefferson and Oak Ridges, with a 3D design and a fixed, itemized quote first.

5.0 star reviews 12+ years · 380+ projects Landscape & Hardscape Professionals
Prepared by the A-Z Landscaping Design-Build Team Richmond Hill, ON12+ years · 380+ projectsLast updated
01

A Richmond Hill driveway contractor based on Brodie Drive

Our office is at 180 Brodie Drive, so a Richmond Hill driveway is local work for us rather than a long haul from another region. That matters on a driveway more than on most projects, because the job depends on timing: excavating when the weather allows, getting granular delivered while the base is open, and coming back quickly if anything needs attention after the first winter.

We build interlock and paver driveways from start to finish with our own crew, covering removal of the old surface, excavation, base construction, laying, cutting, edge restraint and jointing, plus the walkway, steps and landing that usually connect to it. We build with vehicular-rated pavers from Unilock, Techo-Bloc and Belgard, using 60 millimetre units for standard family driveways and 80 millimetre units where a driveway takes heavier vehicles, a trailer or a steep approach.

Every driveway is designed in photoreal 3D on a model of your own house, so you can judge the border colour, the pattern direction and the shape of the apron against your brick and roof before anything is ordered. After twelve years and more than 380 projects, our quotes list the excavation depth and base build-up in writing, because the base is what separates a driveway that lasts from one that ruts.

Driveways in Richmond Hill — at a glance

Service
Driveways
Where
Richmond Hill, York Region
Typical investment
$15,000 – $80,000+
Design
Photoreal 3D, approved before we build
Quote
Fixed and itemised after a free site visit
Warranty
Multi-year on our workmanship
02

Paver driveway construction for Richmond Hill clay and Oak Ridges sand

Richmond Hill has two very different soils under its driveways, and a paver driveway has to be built for the one it sits on. Across much of the city, including Bayview Hill, Mill Pond and Richvale, dense clay holds water and moves with frost. On the Oak Ridges Moraine to the north, sandier ground drains quickly but can be loose and needs careful compaction.

Either way, a driveway is a structure carrying concentrated wheel loads, and we build it like one. We excavate typically 12 to 18 inches depending on soil and use, dig out soft or organic pockets rather than burying them, and lay a geotextile separator so subgrade fines cannot migrate into the granular.

The base goes down in compacted lifts with a plate or roller sized to the job, and the surface is pitched to shed water toward the street or a drain, never toward the garage. Edge restraint is spiked into compacted base, not soil, so the outer courses cannot creep. Where cars turn and park we lay the field in herringbone, which locks mechanically and resists rutting, and use soldier courses or bands for the borders.

The finished field is plate-compacted to seat the units, then the joints are filled with polymeric sand to full depth and set.

03

Driveway widening in Richmond Hill: width limits, curb cuts and the boulevard

Many Richmond Hill driveway projects involve widening, usually to park two cars side by side or to add a turnaround, and widening is where the City's rules matter most. Richmond Hill's front-yard parking and driveway by-laws cap driveway width according to lot width and require a minimum share of the front yard to stay landscaped.

Those regulations have been under review through the City's comprehensive zoning by-law work, so we confirm the current limits for your lot before we draw anything. The driveway apron, the part that crosses the boulevard to the road, sits within the City right-of-way. To widen the apron or add a second entrance for a circular driveway, you must apply to the City for a curb cut.

Approval depends on property size and on the distance from City-owned trees and above-ground City or utility equipment, and only City staff and authorized contractors are allowed to alter City curbs. The City provides curb cut service from May to November, so the timing of the application shapes the timing of your project.

Other work within the City right-of-way, including the boulevard, needs a Road Occupancy Permit. We measure the frontage, existing width and boulevard features at the site visit and only design widths we expect the City to approve.

Neighbourhoods we serve in Richmond Hill

Bayview Hill Oak Ridges Mill Pond Jefferson

Richmond Hill neighbourhood guides

04

Paver driveway designs for Bayview Hill, South Richvale and Jefferson homes

The larger homes in Bayview Hill, South Richvale and Jefferson usually call for more than a rectangle of pavers. Many have wide multi-car garages, long approaches and a front entrance that deserves to be framed, so the driveway design does real architectural work.

We often use a large-format or tumbled field in herringbone with a contrasting soldier-course border, a wider band at the apron, and a change of texture where the walkway meets the drive, so the eye is led to the front door. On wide estate frontages, circular driveways and motor courts give a proper arrival, though a second entrance needs City curb cut approval and is designed with that in mind.

Natural stone steps and a generous landing connect the driveway to the door, and low-voltage path and facade lighting is sleeved under the pavers during construction rather than trenched in later. Colour is chosen outdoors against your brick, stone and roof, not from a showroom board, because many of these homes mix materials.

Permeable pavers are an option where soils and design allow water to soak into the base instead of running to the street, and we also offer heated driveway options, planned with the electrical or hydronic work at the design stage. Every option is shown in 3D before it is priced.

05

Replacing asphalt and concrete driveways on Mill Pond, Oak Ridges and older Richmond Hill streets

On older Richmond Hill streets, around Mill Pond, the original village and parts of Oak Ridges, many homes still have an asphalt or concrete driveway that is cracking. Asphalt fails through alligator cracking, crumbling edges and potholes where water has softened the base. Concrete spalls under road salt and cracks across the slab when the ground moves.

Resurfacing either one rarely lasts, because the problem is underneath. We break out and haul away the old surface, excavate to proper depth, correct the drainage that caused the failure, and build a new interlock driveway that can be repaired unit by unit if a section ever settles or a utility needs to dig.

Mature trees are common on these streets, and they need planning. Richmond Hill's tree preservation by-law requires a permit before removing or injuring any tree 15 centimetres or more in diameter at breast height, and the City treats any encroachment into a tree's protection zone as an injury.

Where a driveway edge or widening comes near a protected tree, we plan the excavation and edge detail around the protection zone and arrange the arborist input and permit before work begins, rather than cutting roots and hoping. Where the existing apron and curb are sound, we tie into them, which can avoid extra work in the City right-of-way.

What is included

Interlock & permeable driveways
Driveway widening & extensions
Borders, banding & aprons
Heated driveway options
Stone & step entrance integration
Re-lay & repair of failing driveways
06

Interlock driveway cost in Richmond Hill and how a driveway build runs

In 2026, interlock driveways in Richmond Hill typically cost $20 to $45 per square foot installed, which puts a standard double driveway at roughly $17,000 to $35,000. Larger estate and circular driveways of 1,200 to 2,500 square feet or more usually run $30,000 to $80,000 or more. Excavation depth, removal of old asphalt or concrete, the paver line and thickness, borders and inlays, widening, steps and drainage work are the main cost drivers.

The process starts with a free on-site consultation, where we measure the driveway, check slopes and drainage, look at trees and boulevard features, and confirm what the City allows for your lot. You then receive a photoreal 3D design and a fixed, itemized quote.

On site, a typical double driveway runs about five to eight working days: removal and haul-away first, then excavation, geotextile and granular in compacted lifts, then the bedding layer, laying, cutting and edge restraint, and finally compaction, polymeric sand and cleanup. We tell you in advance which days the driveway will be closed.

Every driveway is built by our own crew and backed by a multi-year workmanship warranty. Call (416) 846-5893 to book your Richmond Hill interlock driveway estimate.

07

Interlock Driveway Prices in Richmond Hill for 2026

Richmond Hill interlock driveways in 2026 typically cost $20 to $45 per square foot installed. A standard double driveway on a typical Jefferson, Westbrook or Richvale lot usually runs $17,000 to $35,000, while estate and circular driveways of 1,200 to 2,500 square feet or more in Bayview Hill, South Richvale and on larger Oak Ridges lots usually cost $30,000 to $80,000 or more.

A matching front walkway with steps and a landing adds $8,000 to $25,000, and a natural stone entrance with steps $15,000 to $45,000. Where you land in each range depends on removal of the old surface, excavation depth on clay versus moraine sand, paver thickness and line, borders and inlays, the amount of cutting a curved design needs, and any widening or drainage work.

A front-yard lighting package of 8 to 15 fixtures, often added with a new driveway, runs $3,500 to $8,000. Every quote shows the excavation depth and base build-up in writing.

2026 prices in Richmond Hill

Reviewed

ProjectTypical installed costNotes
Interlock driveway$20 – $45 per sq ftA double driveway is roughly $17,000 – $35,000
Estate or circular driveway (1,200 – 2,500+ sq ft)$30,000 – $80,000+Area and base depth drive the price
Front walkway and steps$8,000 – $25,000Interlock or slabs with a landing
Natural stone steps and entrance$15,000 – $45,000Limestone or granite on a frost-proof base

Typical ranges for the GTA, including excavation, base and installation. Your price is fixed and itemized after a free site visit and 3D design. Full cost guide.

08

Before We Dig: Locates, Downspouts and Sump Discharge on Richmond Hill Driveways

A driveway excavation goes deeper than most homeowners expect, so the preparation matters. Before we dig, underground utilities are located, and we note where gas, hydro, cable and water lines cross the driveway or the boulevard so the crew can hand-dig around them. Irrigation lines and low-voltage lighting cable in the front yard are marked so they can be cut cleanly and reconnected afterward.

Water is the next check. Downspouts that discharge onto the driveway and sump pump outlets that empty across it are a common cause of winter ice sheets and settled pavers, so we redirect them into solid pipe or to a planted area where the water can soak in away from the house and the neighbours.

Where a driveway slopes toward the garage, we review the grades and, if needed, add a trench drain at the door. We also photograph the base at each stage, so you have a record of exactly what sits under your pavers.

Typical investment

$15,000 – $80,000+

Free on-site consultation and a fixed, itemized quote for your Richmond Hill property.

Get a Free Estimate (416) 846-5893

Visual Proof

Recent projects in Richmond Hill

Real A-Z projects from our portfolio. Each one links to the service and area pages it belongs to.

Full project gallery
Backyard Pool Oasis — Pools & Water project in Richmond Hill by A-Z LandscapingPools & Water

Backyard Pool Oasis

Richmond Hill

Tiered Stone Entrance Steps — Interlock & Patios project in Richmond Hill by A-Z LandscapingInterlock & Patios

Tiered Stone Entrance Steps

Richmond Hill

Cedar Cabana & Sauna Retreat — Decks & Fences project in Richmond Hill by A-Z LandscapingDecks & Fences

Cedar Cabana & Sauna Retreat

Richmond Hill

Contemporary Front Entry — Steps & Entrances project in Richmond Hill by A-Z LandscapingSteps & Entrances

Contemporary Front Entry

Richmond Hill

Custom Front Entrance with Raised Garden Bed — Retaining Walls & Flower Beds project in Richmond Hill by A-Z LandscapingRetaining Walls & Flower Beds

Custom Front Entrance with Raised Garden Bed

Richmond Hill

Estate Interlock Driveway — Driveways project in King City by A-Z LandscapingDriveways

Estate Interlock Driveway

King City

Good to Know

Driveways in Richmond Hill — FAQs

Most Richmond Hill interlock driveways cost $20 to $45 per square foot installed in 2026, so a standard double driveway usually lands between $17,000 and $35,000. Estate and circular driveways of 1,200 to 2,500 square feet or more typically run $30,000 to $80,000 or more. Removal of the old surface, excavation depth, the paver line, widening and steps move the price, and our fixed quote lists each of them separately.

Usually, yes. Richmond Hill limits driveway width based on lot width and requires part of the front yard to stay landscaped, and widening the apron or adding a second entrance needs a curb cut application to the City. Only City staff and authorized contractors may alter City curbs, and curb cut service runs from May to November. We check your frontage at the site visit and handle the application.

A standard double interlock driveway in Richmond Hill usually takes five to eight working days, and larger estate or circular driveways take longer. The driveway is out of use from removal day until the final compaction and jointing, so we give you the dates in advance and help you plan where to park. We will not lay pavers on a saturated base after heavy rain, which can add a day or two in spring.

On a wide enough lot, often yes. A circular driveway needs a second entrance, and the City requires a curb cut application for it, with approval depending on property size, the distance from City-owned trees and any above-ground City or utility equipment near the curb. We check those factors and the City's driveway width limits first, then design the circle, apron and surrounding landscaping in 3D before quoting.

Shovels and snowblowers are fine; set the snowblower skids slightly above the surface, and if a contractor plows for you, ask for a raised blade or a rubber or poly edge. Interlock tolerates winter better than concrete, but go easy on rock salt in the first winter and check that any ice melt is labelled safe for concrete pavers. Sand is a good choice for traction. Every client receives a short winter-care sheet.

Standards & sources

Codes, standards and authorities we work to

The guidance on this page reflects the rules and industry standards below. We confirm what applies to your address at the site visit, and handle the permits, locates and licensed trades as part of the project.

About the author

A-Z Landscaping logoA-Z Landscaping Design-Build Team

We are a landscape design-build contractor operating out of 180 Brodie Dr #5 in Richmond Hill, serving Vaughan, Toronto and the wider GTA since 2014. Pages are prepared by the A-Z Landscaping Design-Build Team from the projects we design and build across the GTA.

Pages are prepared by our design-build team and updated as codes, by-laws and our pricing change. The date shown on each page is when its content was last updated.

More about A-Z

Who wrote this, and why you can act on it

This driveways page for Richmond Hill is written and kept current by the crews who build it.

Established 2014 — 12+ years building in the GTA
Continuously operating landscape design-build contractor working across Vaughan, Richmond Hill, Toronto, Markham and the surrounding municipalities.
380+ completed landscape projects
Residential and commercial builds ranging from single driveways to full-property design-build programs, documented in our project gallery.
9-person in-house crew — no subcontractors
Masons, carpenters, planters and electricians on our own payroll, so one company carries the design, the build and the warranty.
Photoreal 3D design for every project
Your actual house, grades and material palette modelled in three dimensions and approved by you before any excavation begins.
Fixed, itemised quoting
Excavation, disposal, aggregate, materials, edge restraint, drainage and restoration priced line by line — the signed number is the number you pay.
Multi-year workmanship warranty
Our own build is warranted by us, alongside manufacturer coverage on pavers, wall block and lighting.

Start Your Project

Get a free Richmond Hill estimate

Tell us about your driveways project in Richmond Hill and we'll reach out within one business day to book your free, no-obligation consultation.

We’ll call to schedule your visit.
Your 3D design & fixed quote follow — no cost, no obligation.

📞 We call you🏡 On-site visit🎨 3D design + quote
12+
Years building the GTA
380+
Projects completed
5.0★
Client rating
In-house
Crews, never subcontracted
3D
Design for every project

Landscape design-build contractor · 180 Brodie Dr #5, Richmond Hill, ON L4B 3K8

Call NowFree Estimate